renamed

README.md

@@ -1,12 +1,12 @@
-# BadgeConf
+# NiceBadge
 
-**BadgeConf** is an electronic conference badge and a hands-on platform for learning [TinyGo](https://tinygo.org/) programming.
+**NiceBadge** is an electronic conference badge and a hands-on platform for learning [TinyGo](https://tinygo.org/) programming.
 
-Whether you are attending a conference or just getting started with embedded development, BadgeConf gives you a real piece of hardware to hack on, complete with a ready-to-use firmware, step-by-step tutorials, and progressively more advanced examples that unlock every capability of the board.
+Whether you are attending a conference or just getting started with embedded development, NiceBadge gives you a real piece of hardware to hack on, complete with a ready-to-use firmware, step-by-step tutorials, and progressively more advanced examples that unlock every capability of the board.
 
 ---
 
-![BadgeConf PCB render](assets/pcb1.png)
+![NiceBadge PCB render](assets/pcb1.png)
 
 ## Features
 
@@ -24,12 +24,12 @@ Whether you are attending a conference or just getting started with embedded dev
 
 The microcontroller is the **[nice!nano](https://nicekeyboards.com/nice-nano/)** (nRF52840), which is fully supported by TinyGo and exposes both USB HID and Bluetooth HID out of the box.
 
-![BadgeConf PCB circuit](assets/pcb2.png)
+![NiceBadge PCB circuit](assets/pcb2.png)
 
 ## Repository layout
 
 ```
-badgeconf/
+nicebadge/
 ├── hardware/          # KiCad PCB design files
 │   └── PCB-kicad/
 │       └── production/  # Gerbers, BOM, pick-and-place files
@@ -40,7 +40,7 @@ badgeconf/
 
 ## Firmware
 
-BadgeConf ships two ready-to-use firmwares:
+NiceBadge ships two ready-to-use firmwares:
 
 ### Demo firmware (conference)
 
@@ -62,7 +62,7 @@ Repository: [github.com/sago35/keyboards](https://github.com/sago35/keyboards)
 
 - [TinyGo](https://tinygo.org/getting-started/) ≥ 0.32
 - [Go](https://go.dev/dl/) ≥ 1.22
-- A BadgeConf board (see hardware section below) or a compatible nice!nano dev board
+- A NiceBadge board (see hardware section below) or a compatible nice!nano dev board
 
 ---
 

hardware/PCB-kicad/fabrication-toolkit-options.json

@@ -0,0 +1 @@
+{"ARCHIVE_NAME": "", "EXTRA_LAYERS": "", "ALL_ACTIVE_LAYERS": false, "EXTEND_EDGE_CUT": false, "ALTERNATIVE_EDGE_CUT": false, "AUTO TRANSLATE": true, "AUTO FILL": true, "EXCLUDE DNP": false, "OPEN BROWSER": true, "NO_BACKUP_OPT": false}

hardware/PCB-kicad/nicebadge.kicad_prl

@@ -53,7 +53,7 @@
       "board_outline_area",
       "ly_points"
     ],
-    "visible_layers": "ffffffff_ffffffff_ffffffff_ffffffff",
+    "visible_layers": "ffffffff_ffffffff_ffffffff_ffffffdf",
     "zone_display_mode": 0
   },
   "git": {
@@ -63,7 +63,7 @@
     "ssh_key": ""
   },
   "meta": {
-    "filename": "badgeconf.kicad_prl",
+    "filename": "nicebadge.kicad_prl",
     "version": 5
   },
   "net_inspector_panel": {

hardware/PCB-kicad/nicebadge.kicad_pro

@@ -473,7 +473,7 @@
     "pinned_symbol_libs": []
   },
   "meta": {
-    "filename": "badgeconf.kicad_pro",
+    "filename": "nicebadge.kicad_pro",
     "version": 3
   },
   "net_settings": {
@@ -648,8 +648,8 @@
     "subpart_id_separator": 0,
     "top_level_sheets": [
       {
-        "filename": "badgeconf.kicad_sch",
-        "name": "badgeconf",
+        "filename": "nicebadge.kicad_sch",
+        "name": "nicebadge",
         "uuid": "4597c5c7-ab98-46a0-a1d3-ac8e59abbe7d"
       }
     ],